So with CIC getting a new space here is some stuff we need, if you know someone selling or have some stuff to donate let us know.
Lighting Equipment
Black Stackable Chairs
Lumber:
-*2×4 (cheep: yellow pine)
-*1x any width…Preferably thin… e.g. 1×3, However it’s more common to find
1×12 and I
will find a place to rip it down.
-*3/4″ Ply wood (CD or CDX grade is the least expensive)
-*1/4″ Luaun (lou-on)
-*1/4″ MDF
-any other lumber… free is good
Fasteners:
-*Wood glue
-3/4″ Drywall screws
-*1 5/8″ Drywall screws
-*3″ Drywall screws
Pending on tools we can get a hold of:
-1 1/2″ narrow crown staples
-1″ Brad Nails
Paint Curtains and touch ups:
-*Interior FLAT Black Latex
-*Latex Based (not oil based) Clear Coat (all grades… Silk, Gloss and flat
etc.)
-*Black Duvatine
-Joint Compound
-*Sand Paper 80grit
-100grit
-150grit
-Bondo autobody filler
-*1″, 2″, and 3″ brushes
-*12′ rollers and sleeves(sleeves and the fuzzy things that people call rollers
and rollers
and the handle with the metal rollie part)
-*broom handles
-sponges
-shop rags and industrial paper towels
-*Paint pans or a hook in bucket tray…I’ll explain at next meeting)
-church keys
-*dish soap
-Putty Knife
-*Matte Knive (box cutter)
Other hardware-
-*loose pin hinges
-fixed Pin hinges
-nuts and hex bolts
-#coffin locks (this will make changeable Platforming much easier for your team
to do it
with out a tech guy there)
-lag bolts
-fender washers
-*tie line
-shackels
-turnbuckels
-#crosbys
-#1/8″ air craft cable
-wall anchor
-*screw eyes
-*screw hooks
———————
hand tools
-pry bar AKA flat bar or wonder bar
-Crow bar
-Screw drivers flat and Phillips
-# Pull Saw aka jap saw
-*matte knives
-*hammer
-Nail set
-*Power Shot or some other brand hand stapler
-*Swaging tool
- C7s or C9s
-putty knives
-Chisels
-*various size of drill bits
-*tape measures
-Speed Square
-Combination square
-spirit level
- bevel gauge
Power tools
-*screw guns (cordless)
-*circular saw
-*chop or miter saw
-jigsaw
-*router w/flush trim bit
-drill gun (plug in/ higher torque)
-#pals or orbital sander
Air Tools
# pneumatic Narrow Crown staple gun
# Brad gun
# finish nailer
# air compressor
go to http://www.cait.name Check it out!!